QStE340TM Pickling Steel Coil
ODM GB JIS DIN Pickled Steel Coils QStE340TM
QStE340TM pickling steel coil has high strength, good formability and weldability, and is often used in automotive manufacturing and structural parts production.
| Material: | QStE340TM | Standard: | AISI, ASTM, GB, JIS, DIN |
|---|---|---|---|
| Surface: | Clean/Smooth | Width/length: | As Customer's Request |
| Delivery Term: | FOB/CIF/CFR/DDA | Shape: | Coil/sheet/plate |
| Packing: | Fine Packaging With Oiled Paper | Processing Service: | Welding, Punching, Cutting |
High Light:
ODM Pickled Steel Coils, JIS Pickled Steel Coils, QStE340TM Steel
QStE340TM Pickling Steel Coil
ODM GB JIS DIN Pickled Steel Coils QStE340TM
EPS INTRODUCTION
EPS (Eco Pickled Surface) is a new and environmentally advantageous technology began in 2006 to remove the oxide layer formed during hot rolling of flat rolled steel. The basic principle is that EPS accomplishes mechanical removal of scale using a unique “slurry blast” technology, in which a mixture of carrier liquid (water) and abrasive material impinges against the moving strip of steel. The force, angle and uniformity of slurry impact against the steel strip are precisely controlled to achieve complete scale removal, with no meaningful erosion of the steel substrate. Under the action of the impact force, the iron oxide scale on the surface of the steel plate is removed, and the steel plate becomes a smooth and clean surface.
EPS provides important advantages in flexibility and simplicity of operation over Conventional Acid Pickling by avoid pickling, shot blasting, painting and other pretreatment processes to achieve green and clean production.The technology currently has corresponding application production lines in China, such as: Angang, Taigang, etc., and it complies with the IATF16949 standard.
EPS pickling is safe and recognized as environment-friendly. Instead of caustic acids, EPS uses carbon tempered steel grit, available world-wide, mixed with ordinary water. It continuously recycles and re-uses these ingredients.
PRODUCT CATRGORIES
|
Categories
|
Similar Grades and Standards
|
Similar Grades and Standards
|
Similar Grades and Standards
|
Applications
|
|
Normal
Structure Steel |
Normal
Structure Steel |
JIS G 3101
|
GB/T 912, GB/T 710
|
|
|
Normal
Structure Steel |
SS330
|
SS330
|
Q195 / Q215A / Q215B / 10
|
Remarks SS400: Rm≥400MPa
Q235A: Re≥235MPa |
|
Normal
Structure Steel |
SS400
|
SS400
|
Q235A
|
Remarks SS400: Rm≥400MPa
Q235A: Re≥235MPa |
|
Normal
Structure Steel |
SS490
|
SS490
|
Q275A
|
Remarks SS400: Rm≥400MPa
Q235A: Re≥235MPa |
|
Normal
Structure Steel |
SS540
|
SS540
|
Q420A
|
Remarks SS400: Rm≥400MPa
Q235A: Re≥235MPa |
|
Normal
Structure Steel |
Q/BQB 303
|
EN 10025-2
|
GB/T 912, GB/T 3274
|
|
|
Normal
Structure Steel |
S235JR
|
S235JR
|
Q235B
|
|
|
Low-Carbon Steel
|
Q/BQB 302/EN10111
|
JIS G3131
|
DIN 1614/EN10111
|
|
|
Low-Carbon Steel
|
SPHC/DD11
|
SPHC
|
StW22
|
Suitable for manufacturing cold-formed parts.
|
|
Low-Carbon Steel
|
SPHD/DD12
|
SPHD
|
StW23
|
Suitable for manufacturing cold-formed parts.
|
|
Low-Carbon Steel
|
SPHE/DD13
|
SPHE
|
StW24
|
Suitable for manufacturing cold-formed parts.
|
| Cold Forming Steel | Q/BQB 310 | JISG3113, JISG3134 | ||
| Cold Forming Steel | SAPH310 | SAPH310 | Suitable for automobile structural components that requires good formability, such as chassis parts | |
| Cold Forming Steel | SAPH370 | SAPH370 | Suitable for automobile structural components that requires good formability, such as chassis parts | |
| Cold Forming Steel | SAPH400 | SAPH400 | Suitable for automobile structural components that requires good formability, such as chassis parts | |
| Automotive Structural Steel | Q/BQB 310 | SEW 092:95 | EN 10149-2 | |
| Automotive Structural Steel | QStE340TM | QStE360TM | S355MC | |
| Automotive Structural Steel | QStE380TM | QStE380TM | Suitable for automobile structural components that requires good formability and strength, such as truck beams | |
| Automotive Structural Steel | QStE380TM | QStE380TM | Suitable for automobile structural components that requires good formability and strength, such as truck beams | |
| Automotive Structural Steel | QStE420TM | QStE420TM | S420MC | Suitable for automobile structural components that requires good formability and strength, such as truck beams |
| Automotive Structural Steel | QStE460TM | QStE460TM | S460MC | Suitable for automobile structural components that requires good formability and strength, such as truck beams |
| Automotive Structural Steel | QStE500TM | QStE500TM |
S500MC
|
Suitable for automobile structural components that requires good formability and strength, such as truck beams |
| Automotive Structural Steel | QStE550TM | QStE550TM | S550MC | Suitable for automobile structural components that requires good formability and strength, such as truck beams |
| Automotive Structural Steel | ANGANG | Q/BQB 310 | GB/T 3273-2005 | |
| Automotive Structural Steel | A420L | B420L | 420L | Suitable for automobile components, such as truck beams or cross member |