Metals Brief: Steel, Aluminum & CRGO, Wk 47

This week: LME aluminum backwardation, US HRC prices, EU cold-rolled duties, CBAM changes and the EU safeguard on CRGO.
Ladles of molten steel inside a steel mill

This metals brief covers the week to 20 November 2026 for buyers of automotive steel, aluminum and CRGO outside China. Five items stood out: a very tight nearby aluminum market on the LME, another US hot-rolled coil price increase, new EU anti-dumping duties on cold-rolled steel, two CBAM developments, and the open question over EU safeguards on grain-oriented electrical steel.

LME aluminum: nearby metal is scarce, futures are not

In the LME weekly review for 9 to 13 November, three-month aluminum fell 1.7% to about USD 3,010/t, while the cash-to-three-month backwardation almost doubled, from USD 91 to about USD 176.50/t. Cancelled warrants rose and available stock kept shrinking, and the LME noted that Russian-origin metal made up nearly all available aluminum at the end of October. Market commentary described the spread as the widest since 1990. LME weekly review, Discovery Alert.

Why it matters: when prompt metal costs much more than forward metal, the pricing basis in a sheet or plate contract matters as much as the headline number. Check whether your formula uses cash, three-month or a monthly average, and how regional premiums and alloy or fabrication charges are added on top.

Aerial view of a high-voltage electrical substation
High-voltage substations depend on transformer cores made from grain-oriented electrical steel. Photo: nicida / Pexels

US hot-rolled coil: an 18th straight weekly increase

Nucor raised its consumer spot price for hot-rolled coil by USD 15 to USD 1,310 per short ton on 16 November, its eighteenth consecutive weekly increase, with lead times of three to five weeks. Steel Market Update notes the mill has held or raised the price every week since late August 2025. Steel Market Update, IndexBox.

Why it matters: US flat steel continues to price well above most other regions, supported by Section 232 duties that have been assessed on full customs value since April 2026. Buyers supplying US plants should expect domestic coil and imported parts with steel content to stay expensive, and should confirm how tariff costs are allocated in quotations.

EU: anti-dumping duties on cold-rolled steel

The EU has imposed anti-dumping duties of up to 27.9% on cold-rolled flat steel from India, Japan, Taiwan, Turkey and Vietnam, taking effect on 17 November according to reports citing the European Commission. Rates vary by country and producer. Coated, galvanized, painted and stainless products are outside the scope as reported. IndexBox, citing Reuters.

Why it matters: stamping plants and service centers in the EU that buy uncoated cold-rolled coil from these origins should check the producer-specific rate in the Commission implementing regulation before placing new orders, and review whether open contracts carry duty risk. Switching origin or grade is not automatic; any change of steel source or specification still needs engineering and customer approval.

CBAM: Norway and Iceland join, downstream scope under review

From 1 January 2027, CBAM will also apply in Norway and Iceland under an EEA Joint Committee decision, creating one CBAM area with the EU. The 50-tonne annual import threshold for iron and steel, aluminum, cement and fertilisers will be applied jointly across the three territories, and importers above it will need authorised declarant status. SteelOrbis.

Separately, the Commission report on the 2025 carbon market again pointed to its proposal to extend CBAM from 2028 to about 180 downstream steel and aluminium products. Eurometal. Why it matters: if the proposal passes, more fabricated parts will need embedded-emissions data, so it is worth asking suppliers now how they would provide it.

CRGO and transformer cores: EU safeguard decision ahead

The EU provisional safeguard on grain-oriented electrical steel, which also covers laminations and transformer cores made from it, has been in force since late September and runs until February 2027, when the Commission must decide whether to make it definitive. Transformer makers argue that EU mills cannot supply enough high-permeability grades. IEEE Spectrum. In the US, a widely republished analysis this month put large power transformer lead times at more than three years, with only one domestic GOES mill. Fortune / The Conversation.

Why it matters: trade measures may treat raw CRGO coil, slit coil, cut laminations and assembled cores differently, and none of these is the same as a finished transformer. Core makers and transformer builders should confirm the tariff classification and origin of each stage of the supply chain before relying on a landed-cost estimate.


MOOPEC is a Singapore-headquartered supplier of automotive steel, aluminum, CRGO electrical steel and transformer cores, with service centers in Shanghai and Wuhan supporting both production orders and small batches for die tryout and samples. See our cold-rolled steel, 5xxx aluminum sheet and electrical steel pages, read our CRGO purchasing checklist, or tell us what you need.

Cover photo by Bence Szemerey on Pexels.

Share:

More Posts

REACH and RoHS compliant steel label

REACH & RoHS Compliance for Steel

What REACH and RoHS mean for steel exported to the EU: the 253 SVHC Candidate List, the 10 RoHS substances, China RoHS, ELV, and how to get compliance documents from mills or SGS testing.

Send Us A Message